leon_7_fly_7439.jpg
Bullring Roof
León, España
Structural typology Roof Structures
Date June, 2002
Owner Ayuntamiento de León
The dome-shaped roof was built over an already existing bullring.

The single-layer fixed roof is a Schwelder-type dome composed of IPC commercial steel profiles (parallels, meridians and diagonals) with a 1/8 rise-span ratio. It is supported on steel pillars at its perimeter.

The moveable roof-section consists of two semi-spheroidal segments, which rest upon three beam rails, located on the fixed roof, and which roll along the aforementioned, therefore allowing the opening of the roof.

The open-close system of the roof is fulfilled via a cable-winch system which transfers the necessary pull required for the timed movement of the moveable segments.
Pro
The dome-shaped roof was built over an already existing bullring.

The single-layer fixed roof is a Schwelder-type dome composed of IPC commercial steel profiles (parallels, meridians and diagonals) with a 1/8 rise-span ratio. It is supported on steel pillars at its perimeter.

The moveable roof-section consists of two semi-spheroidal segments, which rest upon three beam rails, located on the fixed roof, and which roll along the aforementioned, therefore allowing the opening of the roof.
The open-close system of the roof is fulfilled via a cable-winch system which transfers the necessary pull required for the timed movement of the moveable segments.
Bullring Roof
León, España
Structural typology Roof Structures
Date June, 2002
Owner Ayuntamiento de León
Scope Detailed design and construction monitoring
The dome-shaped roof was built over an already existing bullring.

The single-layer fixed roof is a Schwelder-type dome composed of IPC commercial steel profiles (parallels, meridians and diagonals) with a 1/8 rise-span ratio. It is supported on steel pillars at its perimeter.

The moveable roof-section consists of two semi-spheroidal segments, which rest upon three beam rails, located on the fixed roof, and which roll along the aforementioned, therefore allowing the opening of the roof.

The open-close system of the roof is fulfilled via a cable-winch system which transfers the necessary pull required for the timed movement of the moveable segments.
compo_7435.jpg
compo2_7436.jpg
compo3_7437.jpg
leon_3_fly_7438.jpg
location
Related projects